Post: E3 Flasher Really Malfunctioning
Options
12-22-2013, 04:06 AM
#1
Tempest Hitman
Can’t trickshot me!
1: esata station with flasher reports no applicable storage device on ps3
2: with flasher and hdd connected, will not take any version of the samsung update
3: even after proper NOR seating with and without coins, backup always reports blinking lights on 1 5 and 6
i dont feel i am skilled enough to solder the e3 linker, and please help me! my e3 doesnt do anything!
cech-2001A
12-23-2013, 04:39 AM
#20
libra7ry
I’m too L33T
Originally posted by shawnf1986
Your blue lights are being powered on because the flasher is plugged into the hdd port... you do not have a good connection , I had to shave off some plastic from my clip before my flasher would read a backup, tried 20 times b4 that then I found a thread by playerk420 i think it was on ps3hax.net about how he modified his clip.. worked perfectly 1st try
The e3 flasher is not powered by the HDD port. It is powered by the NOR chip.
But, I agree he might have to file/shave/sand off a side of the clip, because of the resistors are in the way.
12-23-2013, 04:56 AM
#21
libra7ry
I’m too L33T
Originally posted by Tempest
Please correct me but what does the concept of weight have to do with a connection. There is a big diff between two quarters, dumbbells and calculus books that i've see on this thread. A connection is a connection. Once the blue lights are dancing in the code box I should have a favorable connection. Intermittent or incorrect data upload would result in the error code. That I would think has to do with a cable that is transmitting data incorrectly. Improper pin alignment also would not allow the blue lights.
For the same reason why people tell you to add pennies on top of the clip. To me....that worked for me on certain models. When I downgrade these model, CECH20XX, I use the aspirin and book method. I had to find the sweet spot by moving the bottle and adding the books over over over again. You really don't have to follow my advise and can research the cause of you error. I'm just speaking out of experience and how I helped many people with these models using the weight factor.
You're right a connection is a connection. But, ask yourself is your connection a strong one or a weak one.
"Intermittent or incorrect data upload would result in the error code"
I disagree with that incorrect data. Data is trying to be downloaded from the ps3 not inserted.
The main reason 10001100 is because the clip is not making a good connection with the chip.
12-23-2013, 04:59 AM
#22
xSTON3RM0DZx
Pokemon Trainer
The following user thanked libra7ry for this useful post:
12-23-2013, 05:27 AM
#24
xSTON3RM0DZx
Pokemon Trainer
12-29-2013, 04:42 AM
#25
Tempest Hitman
Can’t trickshot me!
Originally posted by libra7ry
For the same reason why people tell you to add pennies on top of the clip. To me....that worked for me on certain models. When I downgrade these model, CECH20XX, I use the aspirin and book method. I had to find the sweet spot by moving the bottle and adding the books over over over again. You really don't have to follow my advise and can research the cause of you error. I'm just speaking out of experience and how I helped many people with these models using the weight factor.
You're right a connection is a connection. But, ask yourself is your connection a strong one or a weak one.
"Intermittent or incorrect data upload would result in the error code"
I disagree with that incorrect data. Data is trying to be downloaded from the ps3 not inserted.
The main reason 10001100 is because the clip is not making a good connection with the chip.
You're right a connection is a connection. But, ask yourself is your connection a strong one or a weak one.
"Intermittent or incorrect data upload would result in the error code"
I disagree with that incorrect data. Data is trying to be downloaded from the ps3 not inserted.
The main reason 10001100 is because the clip is not making a good connection with the chip.
Follow-up, I am just going to buy a new clip
12-29-2013, 05:03 AM
#28
Tempest Hitman
Can’t trickshot me!
Originally posted by libra7ry
to me that is not enough pressure bro
Well I hear you but it seems to me like one of the teeth on the clip was just bent and therefore will not seat correctly. I have all materials still sitting out but my ps3 cuz I'm playing GTA lol. I haven't ordered the clip, and I'm stuck
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
