Post: Bricked ps3 fat but i have original good backup?
Options
01-31-2015, 05:49 PM
#1
Glenn Quagmire
Vault dweller
02-03-2015, 02:38 AM
#47
Blxst_Modz
Banned
02-03-2015, 03:53 AM
#48
DF_AUS
NextGenUpdate Elite
Originally posted by Modz
Bro i have a problem to my ps3 My PS3 Is F.ed up when i turn on my ps3 i get green light but no signal on my tv ive tried going into recovery mode but my ps3 just turns off everytime i only get one 1 beep. IVE tired every possable thing why is this happening
This issue occur whilst hardware flashing??
02-03-2015, 08:22 AM
#51
Glenn Quagmire
Vault dweller
Originally posted by N0R
When I state the old method of downgrading I mean the very first method of using the E3 when it was distributed,I think there is only 2 ways to downgrade using the E3....the method you used and the original method,when I downgrade I place the e3 board into the hdd space,connect the TF board to the E3 board whilst the ribbon cable is connected to the nor chip,also the hdd is connected externally to the docking station.
So,EVERYTIME you flash your nor dump the console is still soft bricked,correct ???
It's all good man,this happens to me aswel at times,you still have 2 more options left before calling it quits entirely.
1. Have you patched your nor dump with the nor patching program and then tried flashing back to the console? If so what was your outcome?
2. Now,this option is the longest yet has NEVER failed me to date with unbricking,download and READ the txt document to the letter with this tut,here is the link
You must login or register to view this content.
With this tut you will have to flash his provided unbrick file first,then flash your verified dump,then continue with the last 3 steps of the actual downgrade which is flashing the E3downgrade.bin
I'm certain after you attempt this method if everything is connected correctly you will report back that your ps3 is finally Unbricked :-)
So,EVERYTIME you flash your nor dump the console is still soft bricked,correct ???
It's all good man,this happens to me aswel at times,you still have 2 more options left before calling it quits entirely.
1. Have you patched your nor dump with the nor patching program and then tried flashing back to the console? If so what was your outcome?
2. Now,this option is the longest yet has NEVER failed me to date with unbricking,download and READ the txt document to the letter with this tut,here is the link
You must login or register to view this content.
With this tut you will have to flash his provided unbrick file first,then flash your verified dump,then continue with the last 3 steps of the actual downgrade which is flashing the E3downgrade.bin
I'm certain after you attempt this method if everything is connected correctly you will report back that your ps3 is finally Unbricked :-)
Okay I'm gonna try the patched one first but wheres the tut? That's a link to a backup dump???
02-03-2015, 09:30 AM
#52
Glenn Quagmire
Vault dweller
02-03-2015, 09:32 AM
#53
Glenn Quagmire
Vault dweller
02-03-2015, 10:05 AM
#54
Glenn Quagmire
Vault dweller
Originally posted by N0R
When I state the old method of downgrading I mean the very first method of using the E3 when it was distributed,I think there is only 2 ways to downgrade using the E3....the method you used and the original method,when I downgrade I place the e3 board into the hdd space,connect the TF board to the E3 board whilst the ribbon cable is connected to the nor chip,also the hdd is connected externally to the docking station.
So,EVERYTIME you flash your nor dump the console is still soft bricked,correct ???
It's all good man,this happens to me aswel at times,you still have 2 more options left before calling it quits entirely.
1. Have you patched your nor dump with the nor patching program and then tried flashing back to the console? If so what was your outcome?
2. Now,this option is the longest yet has NEVER failed me to date with unbricking,download and READ the txt document to the letter with this tut,here is the link
You must login or register to view this content.
With this tut you will have to flash his provided unbrick file first,then flash your verified dump,then continue with the last 3 steps of the actual downgrade which is flashing the E3downgrade.bin
I'm certain after you attempt this method if everything is connected correctly you will report back that your ps3 is finally Unbricked :-)
So,EVERYTIME you flash your nor dump the console is still soft bricked,correct ???
It's all good man,this happens to me aswel at times,you still have 2 more options left before calling it quits entirely.
1. Have you patched your nor dump with the nor patching program and then tried flashing back to the console? If so what was your outcome?
2. Now,this option is the longest yet has NEVER failed me to date with unbricking,download and READ the txt document to the letter with this tut,here is the link
You must login or register to view this content.
With this tut you will have to flash his provided unbrick file first,then flash your verified dump,then continue with the last 3 steps of the actual downgrade which is flashing the E3downgrade.bin
I'm certain after you attempt this method if everything is connected correctly you will report back that your ps3 is finally Unbricked :-)
Yo can you give me a detailed tut on 2. Do I turn on and off the ps3 between flashing the first backup then mine? Does the wire still have to stay soldered on? My HDD is not plugged in does that really matter? What's the e3downgrade.bin? Please make it a bit more clear so I don't mess up... Thanks bro
02-03-2015, 10:06 AM
#55
DF_AUS
NextGenUpdate Elite
Originally posted by Glenn
Never mind haha 
Yes it supposed to give you a black screen/no hdd/USB port activity,after you flash your patched nor dump and install the E3 downgrade.bin you will be at the step of...disconnecting power cable/reinserting and entering factory service mode,after you enter factory service mode you will notice you have hdd activity ( yellow indicator light will flash and red light on docking station!
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
