(adsbygoogle = window.adsbygoogle || []).push({}); my ps3 wont read any of my disc fuk up need help??? thanx

yea the disc r clean. wont read blue ray or regular cds

---------- Post added at 11:17 AM ---------- Previous post was at 11:16 AM ----------

i might just open it and clean it. its 3years old! might have a alot of dust in it. and its 40GB FAT

Your blu-ray drive is broken.....you will need to replace it.

bout to open it and clean it first

The way i got mine too work Temporarly was going into the secret Menu and going to option 3, should work

Well,my blu-ray drive wont eject discs

Then you have 3 options:

1. Send it in to Sony for repairs at a $150 charge.
2. Take it to an electronic repair shop.
3. Replace the blu-ray yourself but I wouldn't recommend doing this unless you know what you are doing.
4. Buy new PS3.

Good luck though.....I hope you get something worked out.

thanxs :rolleyes:

Will this help?[video]https://m.youtube.com/index?desktop_uri=%2F&gl=US#/watch?v=l1RoxeU4Axo[/video]

You can fix this very easy and cheaper than sending it to sony.
By the sounds of it your laser has failed which is not too bad as long as your logic board works ok which is easy enough to figure out.
Take the top off your ps3 and the metal case around the disc drive put it back in like you are putting it back together but without the case on the drive so you can see the spindle.
Turn on the ps3 and insert a disc a failed laser will spin the disc and stop this will happen a few times like its struggling to get to speed this is a dead/failed laser.
Sometimes the ps3 can read cds/dvds but not blu-ray with a failed laser this is normally the drives with a duel laser but either way to run ps3 games you will need to replace it.
When I replace lasers I only buy the laser sometimes they have an anti static point which needs desoldering before assembly and the drive needs taking apart.
To me I can do this in 20 mins from broke ps3 to working ps3 because I have done a quite a few but for you if you have never done this I would suggest to pay the bit extra and get a fully assembled drive ready to put in without opening it look on ebay they are about 50 uk pounds.
Another thing that is vital is you get the correct drive some logic boards are on the outside some are on the inside you need the same as yours or your ribbon will not fit also open your old drive and under the laser or on the side their will be a sticker which tells you your laser type kem.