Post: [TUTORIAL+INFO] CFW 3.55 Waninkoko! MultiMAN working 100%
Options
01-17-2011, 12:55 AM
#1
ReDLaN
Brute
DESC
TION:This Custom Firmware for the PS3 increases the system features of your console to
allow the installation and execution of homebrew applications.
This Custom Firmware could allow too the loading of legal copies (backups) using
these new included features.
RISK OF BRICKS:
Update: Follow the below list. Find your model # on the PS3 itself. Do not attempt this with 256MB NAND.
* FAT NAND SIZE
o CECHA = 256MB
o CECHB = 256MB
o CECHC = 256MB
o CECHE = 256MB
o CECHG = 256MB
o CECHH = 16MB
o CECHJ = 16MB
o CECHK = 16MB
o CECHL = 16MB
o CECHM = 16MB
o CECHP = 16MB
o CECHQ = 16MB
* SLIM NAND SIZE
o CECH-20..A = 16MB
o CECH-20..B = 16MB
o CECH-21..A = 16MB
o CECH-21..B = 16MB
o CECH-250.A = 16MB
o CECH-250.B = 16MB
o CECH-250.A = 16MB
o CECH-250.B = 16MB
o CECH-251.A = 16MB
o CECH-251.B = 16MB
Waninkoko is working for a new CFW 3.55 who works in all ps3
INSTALLATION:
Originally posted by another user
Two options:
Originally posted by another user
Originally posted by another user
b) Get the .pup by your own:
First download the CFW Waninkoko: You must login or register to view this content.
1. Download PS3 Firmware 3.55 (OFW) (PS3UPDAT.PUP file) here: You must login or register to view this content.
2. Patch PS3UPDAT.PUP file with the patch included in this package using the "bsdiff" tool (You must login or register to view this content.).
First download the CFW Waninkoko: You must login or register to view this content.
1. Download PS3 Firmware 3.55 (OFW) (PS3UPDAT.PUP file) here: You must login or register to view this content.
2. Patch PS3UPDAT.PUP file with the patch included in this package using the "bsdiff" tool (You must login or register to view this content.).
Then:
-Install the patched PUP file like a normal firmware update.
(in case you're already in 3.55 you need to install it in recovery mode).
NOTE: IF YOU ARE IN CFW 3.55 GEOHOT:
1. CFW 3.55GEO to OFW 3.55 with the recovery
2. Install CFW 3.55 waninkoko with the recovery
We don't support and condone the usage of illegal copies.
We are not responsible for any damage for the usage of this Custom Firmware.
POSSIBLE BRICK SOLUTION:
Originally posted by another user
1) We put the console in factory with an usb jig
2) We will put in the root the update 3.55 (PS3UPDAT.PUP) and also lv2diag of naima.
3) We will put the pendrive in the nearest port of the reader bd, we turn on the ps3 and we will see that the pendrive blinks ... we allow that it intall correctly.
4) There was coming a moment in which the green led of ps3 start to blinking indefinitely, we turn off the ps3 and plug off the jig.
5) We turn on the ps3, if all has been correctly we have the red square of the factory mode.
6) We turn off the ps3, remove the condition of factory mode, and turn on the ps3... if everything works correctly is that it has not given no problems.
Nonetheless, we advise you that once have all good in the xmb use the recovery and to reinstall 3.55 for if something was absent.
MultiMAN in 3.41 who works with CFW 3.55 Waninkoko:
You must login or register to view this content.
KUDOS:
- Team fail0verflow
- KaKaRoTo
- flukes1
- Hermes
- jgade
Waninkoko You must login or register to view this content.
The following 10 users say thank you to ReDLaN for this useful post:
01-17-2011, 09:04 PM
#75
smackedgnome
Gobble
01-17-2011, 09:22 PM
#79
FaTbOyOnAbiKe
Do a barrel roll!
01-17-2011, 09:30 PM
#81
tylerthegr8
Can’t trickshot me!
01-17-2011, 09:36 PM
#82
MrAnonymous
Pokemon Trainer
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
